User guide

2-6 E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
I
NSTALLING THE
E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
4 From the list of installed programs select ExtremeWare Enterprise Manager 1.0 and
click Add/Remove. Follow the instructions to remove the component.
I
NSTALLING ON A
SPARC S
OLARIS
S
YSTEM
The following sections assume that you are running in a command or xterm window.
I
NSTALLING THE
E
NTERPRISE
M
ANAGER
S
ERVER
The ExtremeWare Enterprise Manager software is provided in a distribution file in tar
format on the CDROM. You must first extract the contents of the tar file, then you can
run the installation script.
You do not need to be logged in a root to install the Enterprise Manager components
under Solaris, unless you want to use port numbers less than 1024 (for example, port 80
for the Enterprise Manager http server).
When you install the Enterprise Manager Server, it initializes the database. If you
attempt to re-install the server once you have installed it, the installation process
reinitializes the database, and your existing data and configurations will be lost.
To update an evaluation copy of the Enterprise Manager to a licensed copy without
reinitializing the database, follow the update procedure described in the section
“Updating an Evaluation Version to a Licensed Version."
To install the ExtremeWare Enterprise Manager, follow these steps:
1 Insert the CDROM into the CDROM drive.
2 Create a temporary directory to hold the installation files. For example:
mkdir /tmp/eem
3 Make the temporary directory the current directory, and extract the installation files
from the distribution tar file into that directory. For example:
cd /tmp/eem
tar -xvf /cdrom/eem_v1_0/solaris/soldist.tar
This will put the necessary files into the temporary directory.
4 Run the installation script:
./setup
The ExtremeWare Enterprise Manager Welcome screen appears.