User guide

A-6 E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
HP O
PEN
V
IEW
I
NTEGRATION
ExtremeWare Vista is only available when you have selected a Summit
device on the Network Node Manager map. You must add the Extreme
Networks configuration information to the topology database so the Network
Node Manager can recognize Summit devices. Until you do this, you will not be able
to access ExtremeWare Vista from Network Node Manager.
If you choose to do this at a later time, you can run the OV_Extreme.bat command,
found in the HP OpenView
bin directory.
10 In the next dialog Box, click Yes to restart the HP OpenView daemons.
11 Click Finish to complete the installation process.
12 Remove the temporary installation directory:
cd /tmp
rm -rf ovtmp
U
NINSTALLING THE
I
NTEGRATION
C
OMPONENTS
A script is provided for uninstalling the HP OpenView integration. If you removed the
temporary installation directory after you performed the integration, you will need to
extract the integration files again. Refer to the first three steps under “Installing the HP
OpenView Integration Components” to do this.
To uninstall the HP Openview integration, follow these steps:
1 Make the temporary directory the current directory.
cd /tmp/ovtmp
2 Run the uninstall script:
./ovuninstall
3 Remove the temporary installation directory:
cd /tmp
rm -rf ovtmp
L
AUNCHING THE
C
LIENT FROM
HP O
PEN
V
IEW
If you have run the integration process for HP Openview, you can launch the
ExtremeWare Enterprise Manager client directly from the HP OpenView user interface.
You can launch the ExtremeWare Enterprise Manager and ExtremeWare Vista from the
Tools menu, or from a pop-up menu associated with a Summit Device icon on the HP
OpenView map.