User guide

8-14 E
XTREME
W
ARE
E
NTERPRISE
M
ANAGER
I
NSTALLATION AND
U
SER
G
UIDE
M
ANAGING
V
IRTUAL
C
HASSIS
S
TACKS
C
ONFIGURING
V
IRTUAL
C
HASSIS
S
TACK
P
ORTS
If you have Administrator or Manager access, you can configure the mode and load
sharing attributes of the ports on the Summit switches in a VC stack.
You can also configure the ports on switches in the Orphan Summit list. This is done in
the same way as for switches in a VC stack. You may need to do this prior to adding an
Orphan switch to a Virtual Chassis stack.
To configure ports, follow these steps:
1 Select a VC stack or Orphan Summits in the Component Tree.
2 Click Config at the top of the Virtual Chassis Stack Manager page.
The Configure Ports in VC Stack dialog Box appears, as shown in Figure 8-9.
Figure 8-9:
Configure ports in a VC Stack