User guide

EXTREMEWARE ENTERPRISE MANAGER INSTALLATION AND USER GUIDE 5-21
MODIFYING DEVICES, DEVICE GROUPS AND PORT GROUPS
Moving a device from one device group to another requires two steps. First, remove it
from its current device group (returning it to the Default group). Then select the new
device group, and move the device from the Default device group to the new group.
MODIFYING A PORT GROUP
To add or remove ports from a port group, or to rename the group or change its
description, do the following:
Figure 5-14: Port Groups tab of the Modify Devices, Device Groups, and Port Groups
window.
1 Select the port group you want to modify from the Port Groups pull-down list.
2 To change the name or description, type the new text into the Port Group Name
field and the Description field.
3 To remove a set of ports from the Selected Ports list, select the ports and use the
<- Remove button. Use <- Remove All to clear the Selected Ports list.
4 To add ports to a group, first select a device from the Devices list. This displays a
list of ports on the switch that are available to be included in the port group.