User guide

EXTREMEWARE ENTERPRISE MANAGER INSTALLATION AND USER GUIDE 9-11
DELETING A VIRTUAL CHASSIS STACK
4 To remove a Virtual Chassis from the VC stack, select the Virtual Chassis and click
the left arrow button. The selected switch is moved to the Orphan VCs list.
5 To remove a Summit switch from the VC stack, select the switch and click the left
arrow button. The selected switch is moved to the Orphan Summits list.
6 When you have finished adding and removing switches, click the Apply button to
add the new Virtual Chassis stack to the ExtremeWare Enterprise Manager database.
Once you have created a Virtual Chassis stack, you may configure the switches in the
stack to indicate which ports are in SummitLink mode, and whether they are configured
for Load Sharing. See “Configuring Virtual Chassis Stack Ports” for directions on how
to do this.
DELETING A VIRTUAL CHASSIS STACK
You must have Administrator or Manager access to delete a Virtual Chassis stack.
Note:
Deleting a Virtual Chassis stack removes the stack representation in the
ExtremeWare Enterprise Manager database. It does not affect the actual
configuration of the Virtual Chassis or the member switches. The component
devices remain in the Enterprise Manager database.
To delete the representation of a Virtual Chassis stack, click the Delete button at the top
of the main Virtual Chassis Stack Manager window.
The Delete VC Stack dialog box appears, as shown in Figure 9-7.
Figure 9-7: Delete Virtual Chassis Stack