User guide

EXTREMEWARE ENTERPRISE MANAGER INSTALLATION AND USER GUIDE 6-3
VIEWING SWITCH STATUS INFORMATION
•Telnet starts a macro application that allows the scripting and playback of CLI
commands to a selection of Extreme switches. The applet performs a Telnet to the
switch, logs into the switch, and performs the scripted commands. You can also use
this applet to run an interactive Telnet session to an individual switch.
VIEWING SWITCH STATUS INFORMATION
Select Status in the Component Tree to display a summary status of the Extreme
switches known to the Enterprise Manager (see Figure 6-2).
Figure 6-2: The ExtremeView applet, Status summary
• The status “lights” show the status of the device as detected by the ExtremeWare
Enterprise Manager.