User guide

4-24 ExtremeWare EPICenter Software Installation and User Guide
Using the Inventory Manager
Updating Device Information
Occasionally, you may want to update the configuration and status information for one or
more devices in the EPICenter database. The Sync operation is a manual update you can
use if you believe that the device configuration is not correctly represented in EPICenter
applets. It updates all information for a selected set of devices, except for the contact
information.
Ifyou have Administratoror Manager access to EPICenter,you can performaSync.Ifyou
have Monitor access only, you can not use this function.
You can begin the synchronize function using the Syncbutton onthe toolbar, or by
selecting a device or device group in the Component Tree, right-clicking to display the
pop-up menu, and selecting the Sync command.
To refresh the configuration and status information, follow these steps:
1 Click Sync at the top of the Inventory Manager page.
The Synchronize Devices dialog, shown in Figure 4-16, is displayed, listing the devices
in the EPICenter database.
Figure 4-16: Synchronize Devices dialog