User guide

ExtremeWare EPICenter Software Installation and User Guide 4-15
Adding Devices and Device Groups
Adding a Device
1 Click the Add button at the top of the Inventory Manager main window.
Select the appropriate tab to display the Add Device window, as shown in Figure 4-10.
Figure 4-10: Add Device window in the Inventory Manager
2 Enter the device IP address, community strings, device login and password into the
appropriate fields. These are the parameters that EPICenter uses to access the switch.
You may also enter a DNS-resolvable host name in place of the Switch IP address.
3 Select the device group to which this device should belong. It can belong to only one
device group. Default is the default group for managed devices.
4 To clear the contents of the fields and reset them to their default values, click Reset.
5 To add the new device into the database, click Add.