User guide

4-14 ExtremeWare EPICenter Software Installation and User Guide
Using the Inventory Manager
• The up and down arrow buttons letyou move up and down the device tree,displaying
the server messages associated with each device.
• If you check the Errors Only box, the up and down arrow buttons will expand only
devices that had errors.
• The Collapse Allbutton collapses all the device nodes, hiding all the server messages.
Figure 4-9: Message window showing errors from the Add Device process
If you close the Discovery Results window without adding devices, the results for
devices not already in the ExtremeWare EPICenter database are lost. You must
perform a discovery again to regenerate information on those devices.
After the Add has finished, the Discovery Results window is re-displayed. You can select
more devices and specify a different set of Inventory Device Options, and add those
devicestotheInventoryManager.
Adding Devices and Device Groups
Users with Administrator or Manager access can add devices to the EPICenter database,
and createDevice Groups.IfyouhaveMonitoraccess only,you maynot use this function.