User guide

ExtremeWare EPICenter Software Installation and User Guide 4-11
Discovering Network Devices
8 If necessary, you can remove an address range from the Device Discovery Criteria list
at any time before you initiate the discovery by selecting the range and clicking the
Remove button.
You can remove all address ranges using the Reset button at the bottom of the page.
9 Click the Discover button at the bottom of the window to initiate the discovery.
If the discovery criteria results in a discovery of more than 1500 devices, a dialog
appears informing you of the number of items in your search request, and asking you
for confirmation. Click Yes to proceed or No to refine the discovery criteria.
If a discovery request is too large, your browser may not have sufficient memory
resources available to handle it. It is recommended that you break a large
discovery task into multiple separate tasks.
A Discovery Results window is displayed as soon as the discovery process begins, as
shown in Figure 4-6. The panel at the bottom of the window shows the progress of the
discovery and displays status messages for each device it finds as it works through the
set of IP addresses you have specified.
Figure 4-6: Results of a discovery, with details visible
— Click the Hide Details button at the bottom of this window to hide the detail
display.