User guide

3-14 ExtremeWare EPICenter Software Installation and User Guide
Starting ExtremeWare EPICenter
Note that you must have Administrator or Manager access in order to use most of
the functions of these applets. Users with Monitor access will be able to view status,
statistics etc., but will not be able to set up or change EPICenter or device
configurations.
In addition to the applets described above, the Navigation Toolbar may include icons for
other optional applications that have been integrated into the EPICenter server. These
modules or products are typically purchased separately, and enabled via special license
keys. Documentation for these modules is provided separately from the main EPICenter
documentation. These include:
• Policy runs the EPICenter Policy Manager, where you can define QoS policies and
access list rules for implementation on Extreme Networks and Cisco devices. This
applet is an optional module that is licensed separately. It requires the installation of a
separate license key.
•ServiceWatchruns the EPICenter ServiceWatch software within the EPICenter client
browser. ServiceWatch is not an EPICenter module, but a separate product. You can
enable the integration into the EPICenter Navigation Toolbar through the Server
Properties pages in the EPICenter Administration applet.
Main Applet Frame
The main applet frame is used to display the active EPICenter applet. For example, in
Figure 3-7, the VLAN Manager is displayed in the main applet frame.