User guide

3-10 ExtremeWare EPICenter Software Installation and User Guide
Starting ExtremeWare EPICenter
This page displays a simple HTML report with some basic statistics onthe status of your
network. Click on the values in the right-hand column to display a detail report about a
specific status item. From this summary report you can view the following reports:
• Summary status of all the devices known to the EPICenter server.
• Summary status of the devices knownto the EPICenter server that are not responding.
• A summary of alarm definitions that include severity levels of Critical or Major.
• A summary of critical alarms that have occurred in the last 24 hours.
• A summary of critical alarms in the last 24 hours that have not been acknowledged.
• A summary of SNMP Unreachable alarms that have occurred in the last 24 hours.
• A summary of Invalid Login alarms that have occurred in the last 24 hours.
• A summary of Authentication Failure alarms that have occurred in the last 24 hours.
• Summary information on all VLANs being managed by the EPICenter server.
The Network Summary Report can also be accessed from the Reports applet. See
Chapter 16, “Dynamic Reports” for a more detailed discussion of these reports.
From the bottom of the Network Summary Report panel you can navigate to the About
EPICenter page.
The About EPICenter page, shown in Figure 3-6, provides information about the version
ofEPICenter thatyouarerunning.Thisinformationmaybeneededifitbecomes necessary
for you to contact Extreme Networks’ Technical Support.