User guide

ExtremeWare EPICenter Software User Guide 2-15
Installing on a Solaris System
needs the name of this machine and an unused port to listen on.
Please enter the port for the database: [2638]
Accept the default (2638) forthe TCP port that the EPICenter Web Server will use to
communicatewith the database,or enter a different port number. You can use any port
number (a number between 1024 and 9999 is recommended) except a port number
already in use by another process.
11 You are now asked for three ports that the EPICenter Web Server will use.
*** Web Server Parameters
EPICenter runs as a web server and by default accepts HTTP requests
on port 80. You may specify an alternative. Additionally EPICenter needs
two other unused ports , one for a web administrative server and
one for internal usage. If you are not sure what to enter, the defaults
should be acceptable.
Please enter the http port for the web server: [80]
Please enter the http port for the admin web server: [8007]
Accept any or all of the default port numbers, or enter different port numbers.
You can use any port number (a number between 1024 and 9999 is recommended)
except:
— The port number you just entered for the database TCP port.
— Any port number already in use by anotherprocess.
12 Finally, you are asked to confirm the configuration parameters:
*** Configuration
Please review the following items.
Upgrade = NO
License = <the key you entered or “s”>
Database Port = <the port you entered or 2638>
HTTP Port = <the port you entered or 80>
HTTP Admin Port = <the port you entered or 8007>
Arethesecorrect?(Ytoaccept/Ntore-enter)[N]: