User guide

ExtremeWare EPICenter Software Installation and User Guide C-5
Database Event Log View
Database Event Log View
port_number string The Extreme specific representation for the interface,
e.g. “1:3” or “12”.
redundant_media string Specify which media is active, for interfaces without
any redundant media, the value is always “primary”.
For interfaces with redundant media, the value can be
either “primary or redundant”.
algorithm string When the interface is in load-sharing mode, specify the
port sharing algorithm: “none”, “port based”, “address
based”, “round robin”,or“unknown”.
member_port_number string When the interface is in port sharing mode, specify all
members of the port sharing group, e.g. “1:1, 2:1, 2:2,
2:3”.
unsignedIPInt integer The IP address number of the device, to which the
interface belongs. This is the same IP address as in
the IP_Address column, except that the address is
represented using a unsigned 32-bit integer: e.g. the IP
Address “10.205.0.1” is represented as 181207041.
Table C-3: EPICenter Database Event Log View
Event_Log_View
Event_Log_View is a database view that shows the EPICenter alarm event log, but making the
data from each column into a human readable format.
Column Name
Column
Type Description
event_log_id integer An unique id for the event log entry. (This column can
be used as the primary key.)
event_timeticks integer The time when the event happened. This time is
shown as milliseconds since 1970-01-01 00:00:00
GMT.
Column Name
Column
Type Description