User guide

C-2 ExtremeWare EPICenter Software Installation and User Guide
system_oid string The partial system oid, e.g. “1916.2.7” for Summit 24.
device_group_name string The EPICenter device group name of the device group
in which this device belongs to.
ip string The IP address of the device, e.g. “10.205.0.1”.
mac string The MAC address of the device, e.g.
“00:e0:2b:00:5e:00”.
sysName string The sysName of the device.
sysDescription string The sysDescription of the device.
sysLocation string The sysLocation of the device.
sysContact string The sysContact of the device.
read_write_community string The read/write SNMP community string.
read_only_community string The read-only SNMP community string.
clilogin string The CLI/Telnet login name of the device.
clipassword string The CLI/Telnet password for the above login.
status string The status of the device: “operational”, “marginal”,or
“not responding”.
boot_time string The boot time of the device in GMT, e.g. “2000-11-13
21:05:28”.
hardware_id string The vendor specific hardware id of the device (not all
device have a hardware id).
reserved string Reserved field, only used by a Cisco device to store
Cisco specific information.
ip_forwarding string “true” if the device is a router, “false” otherwise.
current_software string The software version of the device.
the following columns are Extreme specific
primary_image string The primary software image version on the device, e.g.
“4.1.9 (2)”.
Column Name
Column
Type Description