User guide

ExtremeWare EPICenter Software Installation and User Guide 1-11
EPICenter Client Requirements
enabled. The Real-Time Statistics modulecan display statistics for anydevice with RMON
enabled, the IP/MAC Finder applet supports all devices running MIB-2 and the Bridge
MIB, with the exception of user mapping, which is specific to Extreme devices.
In the Telnet applet, you can use the Telnet feature with any device that supports a Telnet
interface. In the ExtremeView applet, all Extreme devices and selectedthird-party devices
(includingcertainCiscoand 3COM devices)candisplaya device-specific frontpanelview
in the Summary view. In addition, vendor-specific generic images are available for
additional devices,suchas Sunand Nortel,and astandard generic image canbe displayed
for all other “unknown” devices. New device images and configuration description files
may be added over time—check the Extreme Networks web site for information on new
device support.
EPICenter Client Requirements
The EPICenter client requires a monitor that supports 1024x768 resolution, and at least
16-bit color. Your system Display Settings must be set for 65536 colors.
The client may also use large amounts of memory. 128 MB of RAM is recommended for
best performance (256 MB is recommended if you plan to run the client on the same
system as the EPICenter server).
The client can run using the following browsers:
• Microsoft Internet Explorer version 5.0 or version 5.5 with Service Pack 1 on
Windows NT 4.0 or Windows 2000, with the Java Plug-in 1.3.1.
• Netscape Navigator version 4.7 under SPARC Solaris (2.6, 7, or 8) with the Java
Plug-in version 1.3.1.
See the ExtremeWare EPICenter Release Note and Quick Start Guide shipped
with the software for the latest information about configuration requirements.