User guide

ExtremeWare EPICenter Software Installation and User Guide 16-15
Viewing Predefined EPICenter Reports
If the number ofalarms for a device isgreater than zero,you can click the number to view
a summary of the alarm information for that device.
VLAN Summary Report
To view a VLAN Summary Report, click the VLAN Summary link in the left-hand panel.
This displays a report of the VLANs known to ExtremeWare EPICenter. The information
reported includes:
•VLANName:NameoftheVLAN
•Tag:802.1Qtag,ifany
•Protocol: Protocol used to filter packets for this VLAN
• QoS Profile: QoS profile configured for this VLAN
•Device(DNS)List: IP addresses of deviceswith ports that are members of this VLAN
See Chapter 13 “Using the VLAN Manager” for more information on VLANs.
Interface Report
Toviewa device interfacereport,clicktheInterface Reportlink in theleft-handpanel.This
displays a report on the status of every port known to ExtremeWare EPICenter. The
information reported for each interface includes:
•IPAddress:IPaddressoftheinterface
•Port:Portnumberoftheinterface
• AdminStatus: Interface administrative status (enabled/disabled)
• OperStatus: Operational status of the interface (ready/active)
• Configured speed/type: Nominal (configured) speed of the interface
• Actual speed/type: Actual speed of the interface
Since the EPICenter server may be aware of many hundreds of ports, the interface
information isdisplayedingroupsof25portsper page.Youcannavigateamongthepages
using any of the following methods:
• Clicking the Previous and Next links
• Selecting a page number from the at the top of the report
• Clicking the First or Last links to display the first or last page in the report