User guide

16-14 ExtremeWare EPICenter Software Installation and User Guide
Dynamic Reports
•SerialNumber: Device serial number
Click the heading of a columnto sort on the contents of that column.
Device Status Report
To view a Device Status Report, click the Device Status link in the left-hand panel. This
displays the device status and failure log for all devices known to EPICenter.
The initial display presents a summary at the Device Group level. This includes the
following information:
•Group:DeviceGroupname
• Description: Description of the group as kept in the EPICenter device inventory
• Alarms Defined: Total alarms for all devices in the device group
• Devices Up: Number of devices in the group that are up
• Devices Not Responding: Number of devices in the group that are not responding
Select a Device Group to display the Device Status Report for the devices in the group.
The Device Status report displays the following information:
• Device Name:NameofthedevicefromthesysName variable
•IP: IP address of the device
• Status: A green, yellow, or red status “light”
Green indicates the device is up and OK.
Yellow indicates the device is responding but is reporting fan, temperature, or power
supply errors.
Red indicates that the device is unreachable.
• Last Failure (GMT): Time at which the most recent device failure occurred
• Down Period (d:h:m:s): Length of time the device was unreachable, reported in
days:hours:minutes:seconds
• Boot Time (GMT): Time when the device was last booted
• Alarms in last 24 hours:Numberofalarmsinthelast24hoursfromthisdevice
If the number of alarms is greaterthan zero, you can click on the number to display a
summary of the alarms that have occurred for this device.