User guide

ExtremeWare EPICenter Software Installation and User Guide 16-13
Viewing Predefined EPICenter Reports
•RadiusPort: Port currently used by the RADIUS server
•TelnetPort: Port currently used for Telnet
• Database Port: Port currently used for EPICenter database communication
The Web Server, Trap Receiver, Radius and Telnet ports can be changed through the
Administration applet, if you have administrator-level access to EPICenter. See
Chapter 15, “Administering EPICenter,” for more information.
If you are running under Windows NT orWIndows 2000, you can use the Port
Configuration Utility, accessiblefrom thePrograms menu,tochange thedatabase port.See
Appendix B “EPICenter Utilities” for details on the utility.
There are no further detailed reports available from this report.
Device Inventory Report
To view a Device Inventory Report, click the Device Inventory link in the left-hand panel.
The Device Inventory Report displays basic status and identification information for the
devices known to ExtremeWare EPICenter. The initial display presents a summary at the
Device Group level. This includes the following information:
•Group:DeviceGroupname
• Description: Description of the group as kept in the EPICenter device inventory
• Devices: Number of devices in the group
Select a Device Group to display the Device Summary report for the devices in the group.
The Device Summary report displays the following information about each device:
•Group: EPICenter Device group to which it belongs
•IPAddress:IPaddressofthedevice
Click the IP address to display a table with detailed configuration and status
information. This is the same information you can view in the Inventory applet.
•Name:Devicenamefromthe
sysName variable
• Status:Devicestatus
• Boot Time (GMT): Time when the device was last booted
•MAC: MAC address of the device
•S/wversion: Software versioncurrently running on the device, if known