User guide

16-10 ExtremeWare EPICenter Software Installation and User Guide
Dynamic Reports
• By logging in directly from the EPICenter Start-up page
To log in directly from the EPICenter software Start-up page, follow these steps:
1 Launch your Web browser.
2 Enter the following URL:
http://<host>:<port>/
In the URL, replace <host> with the name of the system where the ExtremeWare
EPICenter server is running. Replace
<port> with the TCP port number that you
assigned to the ExtremeWare EPICenter Web Server during installation.
If you used the default web server port, 80, you do not need to include the port
number.
The EPICenter Start-up page appears.
3 Click View Reports in the left-handpanel of theStart-up page.
The ExtremeWare EPICenter Login page appears.
4 Enter your user name and password, and click Login. Use the same user name and
password as you use to log in to the EPICenter system.
The Dynamic Reports module is displayed. The main page includes a brief description
of the predefined reports that are available.
Viewing Predefined EPICenter Reports
To view a predefined report, click the appropriate link in the left-hand navigation panel.
To go to the main ExtremeWare EPICenter user interface, click the “About EPICenter”link
at the top of the list. This displays the About ExtremeWare EPICenter page.
To exit from ExtremeWare EPICenter, click the Logout link in the left-hand panel. This
returns you to the ExtremeWare EPICenter Start-up page.
Report Filtering
Four of the reports provide a filtering capability that lets you select the information that
should appear in the report. This filtering capability lets you construct a two-part