User guide

16-6 ExtremeWare EPICenter Software Installation and User Guide
Dynamic Reports
Critical Alarms Defined
This report provides a summary of alarms defined as having a severity level of Critical or
Major. It shows the following information for each alarm:
•AlarmName: Name of the alarm
•Category: Alarm category of which this alarm is a member
• Enabled: Whether the alarm is currently enabled or disabled
• Severity: Severity level of the alarm (Critical or Major)
See Chapter 5 for more information on alarm definitions, categories, and other alarm
topics.
Critical Alarms for Last 24 Hours
Asummaryofcriticalalarmsthathaveoccurredin thelast24hours.Itshowsthefollowing
information.
•AlarmName: Name of the alarm
•Category: Category that the alarm is classified under
•SourceIP: IP address of the device that generated the alarm
•Time(GMT): Time the alarm occurred (Greenwich Mean Time)
•Event#: Event ID of the alarm (assigned by the EPICenter server when the alarm is
received)
• Severity: Severity level of the alarm
You can view the complete Alarm Log report, showing all EPICenter alarms, from the
Reports module. See “Alarm Log Report” on page 16-17.
See Chapter 5 for more information on alarm definitions, categories, and other alarm
topics.
Unacknowledged Critical Alarms
A summary of critical alarms that have occurred in the last 24 hours that have not been
acknowledged. It shows the following information.
•AlarmName: Name of the alarm