User guide

15-16 ExtremeWare EPICenter Software Installation and User Guide
Administering EPICenter
• DNS Lookup Timeout Period: The time-out period, in milliseconds, whenperforming
DNS lookup operations for hosts found through DLCS or when importing (in the
Grouping applet) from anNTDomain Controller. The defaultis1000 milliseconds(one
second).
• SessionTimeoutPeriod:Thenon-activity time-out period,in milliseconds,afterwhich
the user is required to re-loginto the EPICenter server. The default is 600,000
milliseconds (ten minutes). You can disable the time-out by setting the property to -1.
•ServiceWatchURL:TheURL foraccessingExtremeWareServiceWatch,to allow it tobe
launched from the EPICenter navigation toolbar, and to run in the main EPICenter
applet window.
Forexample,ifServiceWatchisrunningona systemnamed“tampico”atport2000,you
would enter
http://tampico:2000 as the ServiceWatch URL. You must then restart
the EPICenter server to activate the ServiceWatch integration.
• IP QoS Rule Precedence: Thestarting value that the EPICenterserver willuse for
setting precedence in the Policy Manager applet. This is an integer between 1 and
25,600. The default value is 10,000.
Setting this value lets you ensure that policies created by EPICenter will have higher
precedence than policies created through the ExtremeWare CLI. It is also useful in
distinguishing between policies created through the CLIand those createdthroughthe
EPICenter Policy Manager applet.