User guide

14-4 ExtremeWare EPICenter Software Installation and User Guide
The ESRP Manager
Figure 14-2: ESRP detail for an individual ESRP-enabled VLAN
ESRP trap events will also be recorded in the EPICenter Event Log, which you can view
using the EPICenter Event Log Report (see Chapter 16, “Dynamic Reports”). ESRP state
changetraps will be recorded in the EPICenter Alarm Log (see Chapter 5,“The EPICenter
Alarm System”).
ESRP Traps are not implemented in ExtremeWare versions 4.x or 5.x. Thus, for
switches running those versions of ExtremeWare, state changes and other ESRP
updates will only be reflected after the next ESRP polling interval.
NotethatanESRP-enabledVLAN can be monitored byEPICenteraslongas at leastoneof
its ESRP-enabled switches is managedby EPICenter (i.e.is included inEPICenter’s device
database). If there are other ESRP-enabled switches in that VLAN, their ESRP status will
also bedisplayed in theESRP Manager, even ifthey are notbeing managed byEPICenter.