User guide

ExtremeWare EPICenter Software Installation and User Guide 13-11
Modifying a VLAN
Figure 13-8: The Modify VLAN dialog, Properties and Ports page
2 Select a VLAN from the drop-downlist in the VLAN Name field.
The current values for the VLAN are displayed.
The Ports in VLAN list does not display SummitLink ports, because you cannot
modify them.
3 To change the Protocol Filter selection, select a different entry from the pull-down
Protocol Filter list.
4 To change the VLAN tag, type a new value into the Ta g field.
To disable tagging for the VLAN, type “untagged” or 0 (zero) into the Tag field.
5 To remove a port from the VLAN, select the port in the Ports in VLAN list, and click
Remove.
6 To adda port totheVLAN, firstselect theswitch from theAvailable Switches list. This
displays a list of ports on the switch that are available to be included in the VLAN.
The Available Ports list does not include ports in SummitLink mode, or ports
configured as slave load sharing ports.
7 Select a port from the Available Ports list.