User guide

ExtremeWare EPICenter Software Installation and User Guide 13-9
Deleting a VLAN
Figure 13-6: Add VLAN dialog, IP Forwarding page
2 Select a switch from the table of switches.
3 Enter anIP address andIP mask.Click the EnableIP Forwarding check box if youwant
to enable IP forwarding for this VLAN on the switch.
4 Click Apply to implement the changes.
5 Click Close to exit the window.
Deleting a VLAN
Users with Administrator or Manager access can delete VLANs from Extreme Networks
switchesmanagedbytheEPICentersoftware. If youhaveonlyMonitoraccess, youcannot
use this function.
To delete a VLAN, follow these steps:
1 Click the Delete button in the VLAN Manager panel.
The Delete VLAN dialog is displayed, as shown in Figure 13-7.