User guide

11-12 ExtremeWare EPICenter Software Installation and User Guide
Real-Time Statistics
Graph View (Figure 11-6) lets you change from 3D to 2D displays, and change the values
for the 3D depth, elevation and rotation.
Figure 11-6: Setting 3D graph preferences
• To change to a 2D graph view, click the Set 3D Graph View box to remove the check
mark.
•ViewDepthcontrols the depth of a bar. The default is 10, maximum is 1000.
• View Elevation controls the elevation (rise) from the front of the bar to the back, in
degrees. The default is 10°, range is ±45°.
• View Rotation controls the angle of rotation of the bar, in degrees.The default is 12°,
range is ±45°.
• Minimum Graphed Utilization specifies the minimum scale for the Y axis for
utilization graphs. The default is 1.0 (1%), meaning that the Y axis will not show less
than 1% as the top value of the Y axis.
• Minimum Graphed Errors specifies the minimum scale for the Y axis for error graphs.
The default is 25, meaning that the Y axis will not show less than 25 errors as the top
value of the Y axis.