User guide

ExtremeWare EPICenter Software Installation and User Guide 11-11
Setting Graph Preferences
Determines whether the graph data is updated automatically at every
sampling interval. Click on the icon to toggle between continuous updates,
indicated by the bar with the red dot (representing a traveling data packet),
and the open palm, indicating that updates have been suspended.
Select this to take a “snapshot” of the graph or table view of the current
real-time statistics data.
Select this to bring up the graph preferences pop-up window. You can change
a variety of settings, such as graph and data colors, the sampling interval, or
the number of ports in a top N display.
Setting Graph Preferences
To change the graph settings used in this applet, click the Set Graph Preferences icon in
the toolbar.
The Graph Preferences window is displayed, as shown in Figure 11-6.
Use the tabs across the top of the window to select the type of setting youwant to change.
Each tab displays a page with a group of related settings. When you have changed any
settingyouwantonagivenpage:
• Click Apply to put the changes into effect, but keep the Graph Preferences window
open so you can make changes on another page.
• Click OK to put the changes into effect and close the Graph Preferences window.
The Graph preferences settings are not persistent—if you move to another
EPICenter applet, the settings will return to the defaults.