User guide

10-4 ExtremeWare EPICenter Software Installation and User Guide
Using ExtremeView
Select a Device Group name to show summary status for the devices in the group.
• The status “lights” show the status of the device as detected by EPICenter.
• The name,type of switch, IP address,the ExtremeWare software version, and the last
reboot time are retrieved from the device by EPICenter.
Select a device in the Component Tree on the left to display detailed configuration and
status information, as shown in Figure 10-3. This display shows additional information
that EPICenter has gathered from the switch agent.
Table 10-1: ExtremeView Device Status Indicators
Status Light Device Status
Green Device is up and OK
Yellow Device is responding, but reports an error condition such as a fan or
power supply failure, or excessive temperature
Red Device is not responding to EPICenter status queries. This may mean
that the switch is down, that it is unreachable on the network, or that the
SNMP community strings have changed and EPICenter can no longer
contact the switch.