User guide

xviii ExtremeWare EPICenter Software Installation and User Guide
12-1 The Topology View 12-3
12-2 Example of device nodes, including an unknown device type 12-4
12-3 Example of a submap node 12-5
12-4 Example of an L2 cloud node 12-5
12-5 Example of hyper node icons representing a device and an L2
cloud 12-6
12-6 Example of a decorative node 12-6
12-7 Example of a gigabit link showing endpoint connectivity and Up
status 12-7
12-8 Adding a new map 12-11
12-9 Adding a decorative node to the map 12-13
12-10 Adding a link to your map 12-14
12-11 Specifying ports for a new link connection 12-15
12-12 Finding a node in the current view 12-23
12-13 Setting Map Properties for the current map 12-24
13-1 VLAN Manager applet, showing devices organized by VLAN13-3
13-2 VLAN topology shown by switch 13-4
13-3 VLAN member ports on a selected switch 13-5
13-4 Switch member ports for a selected VLAN 13-6
13-5 Add VLAN dialog, Properties and Ports page 13-7
13-6 Add VLAN dialog, IP Forwarding page 13-9
13-7 The Delete VLAN page 13-10
13-8 The Modify VLAN dialog, Properties and Ports page 13-11
13-9 The Modify VLAN dialog, IP Forwarding page 13-12
13-10 Protocol Panel dialog box, View/Delete page 13-13
13-11 Protocol Panel dialog box, Add Protocol page 13-14
14-1 ESRP Manager showing summary ESRP-enabled
VLAN status 14-2
14-2 ESRP detail for an individual ESRP-enabled VLAN 14-4
15-1 User Administration window 15-4
15-2 Edit User window 15-5
15-3 New User and Edit User windows 15-6
15-4 Change Password window 15-9
15-5 Radius Administration page 15-10
15-6 Server Properties Configuration page, initial properties list 15-12
16-1 Network Summary Report page 16-2
16-2 Network Summary Detail report 16-3
16-3 Report filter specification 16-11