User guide

ExtremeWare EPICenter Software Installation and User Guide 6-17
Configuring the TFTP Server
Figure 6-9: Configure TFTP Server window
By default, the embedded TFTP server is enabled.
• Click the Disable EPICenter TFTP Server button to disable the server. You can then
provide a path in the Set TFTP Root field to the location of a different TFTP server.
• Click the Enable EPICenter TFTP Server button to enable the server.
If you disable the server, you will not be able to upload or download configuration
information or software to your devices, unless you provide a path to an alternate
TFTP server.
• To change the location of the TFTP server root, change the path in the Set TFTP Root
field.
By default,the TFTP server is installed in
<epicenter_install_dir>\user\tftp
where <epicenter_install_dir> is the directory where the EPICenter server is
install. By default, the TFTP server is found in
epc3_1\user\tftp in the Windows
operating environment, or
/opt/epc3_1/user/tftp on a Solaris system.
EPICenter will create foursubdirectories (
baselines, bootrom, configs,andimages)as
children of the directory you specify as the TFTP server root.
If you plan to use this TFTP server with other software, such as the ExtremeWare
CLI or for any other purpose, be aware of possible differences in the expected
locations of the TFTP server and other components such as ExtremeWare software
images or configuration files. See the ExtremeWare EPICenter SE Release Note
and Quick Start Guide for information on any known issues.