User guide

6-16 ExtremeWare EPICenter Software Installation and User Guide
Configuration Manager
Figure 6-8: Configure New Image window
Enter the version information into the appropriate field. The version information is the
version, release, and build number (in parentheses) associated with a specific
ExtremeWare software release. For example, for a Summit device this could be a version
such as 4.1.19 (2) or 5.0.4 (3). For the “i” chipset devices, it should be 6.1.5 (20) or later.
You must specify the version exactly in its correct form, including periods, spaces,
and parentheses. For example, version 6.1.5 b20 must be specified as “6.1.5 (20)”,
with a space between the 5 and the “(“. The version names are always in the form
#.#.#_(#) where # is a numeric, and _ indicates a space.
Configuring the TFTP Server
If you already have a TFTP server installed on the system where the EPICenter server is
running, you may choose to use that TFTP server instead of the one provided with
EPICenter. This is the server that actually does the downloading and uploading from the
devices.
The Server function lets you enable or disable the embedded TFTP server, and specify an
alternate path for the location of the server.
Click the Server button at the top of the window to displaythe Configure TFTP Server
window, as shown in Figure 6-9.