User guide

ExtremeWare EPICenter Software Installation and User Guide 6-15
Specifying the Current Software Versions
You cancheck the Extreme Networks web site for theavailabilityof newer software
releases.
b Select the download target in the Download Image To field: Current, Primary, or
Secondary.
5 For a BootROM upgrade,select the BootROM image you want to download from the
drop-down menu in the Available BootROMs field.
Standard BootROM images are provided in the directory
<EPICenter_install_dir>\user\tftp\bootrom directory (by default
epc3_1\user\tftp\bootrom in the Windows operating environment, or
/opt/epc3_1/user/tftp/bootrom on a Solaris system).
6 Indicate whether the devices should be rebooted:
— Click None to indicate the devices should not be rebooted.
— Click Now to indicate the devices should be rebooted immediately after the
download.
— Click After to indicate the devices should be rebooted at a later time, and enter the
number of hours (up to 72) to wait before doing the reboot.
7 Click Apply to start the software download to the selected devices.
Click Reset to return the window to its initial state (removing all devices from the
Upgrade Image on Devices list, removing all image selections, and so on).
8 When the upgrade process has completed, click Close to close the Upgrade Image on
Devices window.
Specifying the Current Software Versions
TheVersions window lets youspecify thecurrentversion oftheExtremeWaresoftwarefor
pre-”i” Series devices (Summits/Black Diamonds) and “i” Series devices.
This information is used by the EPICenter software to determine whether an individual
device is running the version you have specified as the “current version.” This is the
version that appears in theNew Image columnintheUpgradeImage on Device window.
Click the Versions button at the top of the window to display the Configure New Image
window, as shown in Figure 6-8.