User guide

6-14 ExtremeWare EPICenter Software Installation and User Guide
Configuration Manager
The entries in the Current Image, New Image,andImage Status columns let you
determine which switches have outdated software images.
— The Current Image shows the image currently running in the device.
— The New Image information comes from the information you provide in the
Version s window for devices of this type (see “Specifying the Current Software
Versions” on page 6-15). Ifyou have not specified a softwareversion in the Versions
window, this will be blank.
— Image Status shows the status of the image compared to the version shown in the
New Image column. A green check indicates that the version running in the
deviceandthe NewImage versionarethesame. A redX indicatesthat the image
running in thedevicediffers from the NewImage version. The status is also shown
asaredXiftheNewImagescolumnisblank.
— The BootROM column shows the version of the BootROM running on the device.
2 From the Available Devices list, select the devices you want to upgrade, then click the
Add-> button.
If you want to upgrade the images on all the displayed devices, click the Add All->
button.
The devices you select will be moved to the Upgrade Image on Devices list.
To removedevicesfrom the Upgrade Image on Devices list,selectthedevicesand click
the <-Remove button. This moves the selected devices back to the Available Devices
list. Click <-Remove All to move all the devices in the Upgrade Image on Devices list
back to the Available Devices list.
3 In the Image Options box select the type of upgrade you want to perform:
— Click the Image Download button to specify a software image upgrade.
— Click the BootROM Download button to specify a BootROM upgrade.
4 For a software image upgrade do the following:
a Select the software image you want to download from the drop-down menu in the
Available Images field.
Note that there are different images for Summit devices and the “i” Series
devices. If you try to download an incompatible image, you will receive an error
message.
Standard images as shipped by Extreme Networks are provided in the directory
<EPICenter_install_dir>\user\tftp\images directory (by default
epc3_1\user\tftp\images in the Windows operating environment, or
/opt/epc3_1/user/tftp/images on a Solaris system).