User guide

ExtremeWare EPICenter Software Installation and User Guide 6-11
Downloading an Incremental Configuration to Devices
Figure 6-6: Download incremental configuration window
From this window, do the following:
1 SelectaDeviceGroup in theDevice Groupsfield. Thedevicesthatbelongto thisgroup
are displayed in the Available Devices list.
2 Fromthe AvailableDevices list,selectthedevicesforwhichyou want todownloadthe
baseline configuration, then click the Add-> button.
If you want to download the baseline configuration to all the devices in the Device
Group, click the Add All-> button.
The devices you select will be moved to the Apply Incremental Config to: list.
To re mo ve dev ices fro m the Apply Incremental Config to: list, select the devices and
click the <-Remove button. This moves the selected devices back to the Available
Devices list. Click <-Remove All to move all the devices in the Apply Incremental
Config to: list back to the Available Devices list.
3 Select the baseline configuration you want to download from the pull-down list in the
Available Incremental Configs field.
4 Click Apply to start the baseline download to the selected device.
The EPICenter software does not save the configuration on the device after the
download. You can use the Telnet applet to open a telnet session on the affected
devices and execute a save configuration command.