User guide

ExtremeWare EPICenter Software Installation and User Guide 5-37
Event Configuration
Resynchronizing the RMON Rules
To resynchronize EPICenter’s database with the RMON rules in place on a switch, do the
following:
1 Click the Sync button at the top of the window.
The Synchronize RMON Rules window is displayed, as shownin Figure 5-17.
Figure 5-17: The Synchronize RMON Rules window
You can resynchronize individual devices or all devices in a device group.
2 To select a device group, select Device Group from the pull-down list in the Source
Type field. A list of device groups will be displayed.
To select individualdevices,select Devicesin the Source Type field. A list is displayed
showing all the Extreme Networks devices managed by EPICenter.
3 To add a device or device group to the Selection list, select the device or device group
and click Add ->. To add all devices or device groups in the list, click Add All ->.
4 To remove a device or device group from Selection list, select the item and click
<- Remove.Toremovealldevicesordevicegroups,click<- Remove All.
5 Click Synchronize to initiate the synchronization process.
The Alarm Manager usesSNMP to retrieve configuration and status information from
each selected switch, and updates the database with that information.