User guide

5-26 ExtremeWare EPICenter Software Installation and User Guide
The EPICenter Alarm System
For a detailed definition ofthese parameters, see “CPUUtilization RuleConfiguration”on
page 5-31.
Creating an Event Rule
To create a new event rule, click the Add button at the top of the page.
The New Configuration Rule window is displayed, as shown in Figure 5-11.
Figure 5-11: New Configuration window
There aretwo partstoaneventrule; therule configurationitself, andtheassociationof the
rule to its target devices.
The New Configuration window comes up with the Configuration page displayed.
In the Configuration Type field,selectthetypeofruleyouwanttocreate(RMONEvent
or CPU Utilization) from the drop-down list.
CPU Utilization is only supported on switches running ExtremeWare 6.2 or later.
Whenyoufinishentering theconfiguration and targetinformation, click theApplybutton,
and the new rule is added to the Configurations tree. For RMON rules, the rule name is
includedasa “folder” andeachtarget device for the rule appearsas a separatecomponent
under that rule. The rule name will also appear in the Event Name list.