User guide
ExtremeWare EPICenter Software Installation and User Guide 5-13
Defining Alarms
The Alarm Scope
To definea scopefor thealarm,clickthe Scope tab. TheScope definitionpage isdisplayed,
as shown in Figure 5-6.
alarmRepeatPeriod The time frame within which the repeated events
must occur for the alarm to be generated
alarmSourceDeviceName The name of the device on which the event(s)
occurred (taken from the EPICenter database)
alarmSourceIP The IP address of the device on which the event(s)
occurred
alarmSourceIfIndex The interface on the device on which the event(s)
occurred
alarmGMTTime The time at which the alarm occurred, in Geenwich
Mean Time
alarmLocalTime The time at which the alarm occurred, in local time
alarmMessage The message defined for the alarm
alarmActions The list of actions defined for the alarm
eventLogID The ID of the alarm in EPICenter’seventlog
eventTypeName The type of event (SNMP Trap, RMON Rising Trap,
RMON Falling Trap, or EPICenter event)
concatenated with the Event Name (the SNMP trap
name, RMON rule name, or EPICenter event name).
eventGenericType The SNMP Generic Type number of the trap
eventSpecificType The SNMP Specific Type number for an
enterprise-specific trap
eventTypeStr The event description
eventEnterprise The Enterprise portion of the Object ID (OID) of the
event
eventData The data associated with the trap
Table 5-1: EPICenter Alarm Variables
Variable Name Description