User guide

ExtremeWare EPICenter Software Installation and User Guide 5-7
The Alarm Log Browser
the top of the alarm summary display. The predefined filters are based on time: last one
hour, last two hours, yesterday, and so on.
If you invoke the Alarm Browser from the Topology applet (using the pop-up menu for a
specific node) the default filter is set to filter on the Source IP of the node you selected.
To specify your own filter, click the Filter button at thetop of thepage.
The Define Alarm Log Filter pop-up window is displayed, as shown in Figure 5-3.
Figure 5-3: Alarm Log filter definition pop-up window
To create your own filter, do the following:
1 If the “Default Filter: view last 300 alarms” check box is checked, the remaining fields
will be greyed-out. Uncheck the check box to enable the other fields.
2 Select the parameter you want to use as a filter criterion from the pull-down menu in
the Field field.
3 Select an operator using the pull-down menu in the Operator field.