User guide

5-2 ExtremeWare EPICenter Software Installation and User Guide
The EPICenter Alarm System
selected traps from other MIBs. When an alarm occurs you can specify actions such as
sending e-mail, running a program, running a script, or sounding an audible alert.
Extreme Networks devices are configured automatically by EPICenter to send traps
to the EPICenter server. To receive traps from non-Extreme devices, you must
manually configured the devices send traps to the EPICenter server.
Not all trap events are supported in older versions of the ExtremeWare software.
Please refer to Appendix D for information on the switch software required for specific
traps.
The Alarm Log Browser
Click the Alarm button in the Navigation Toolbar to run the Alarm System applet and
view the Alarm Log Browser. If the Alarm button (icon) is displayed in red instead of
black, it indicates that a new alarm has occurred.
You can also invoke the Alarm Log Browser from the Topology view.
The Alarm Log Browser page appears, as shown in Figure 5-1.