User guide

ExtremeWare EPICenter Software Installation and User Guide 4-25
Finding Devices
2 To select a device from a specific device group, select the device group from the
pull-down list in the Filter by Device Group field. Select All to view the list of all
devices from all device groups.
3 Select one or more devices in the Device list.
4 Click Reset at any time prior to initiating the Sync to deselect all device selections and
start over.
5 Click Sync to initiate the synchronization process.
The Inventory Manager uses SNMP to retrieve configuration and status information
from each selected switch, and updates the database with that information.
6 The Sync function displays a dialog box with status or error information. Click OK to
continue.
Finding Devices
You can search for a device in the EPICenter database by name, by IP address, or by type
of device. This may be useful if you have a large number of devices in your inventory.
To search for a device, follow these steps:
1 Click Find at the top of the Inventory Manager page.
The Find Devices dialog, shown in Figure 4-17, is displayed.