User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
5-1
5
Configuring Summit Switch Ports
This chapter covers the following topics:
• Enabling and Disabling Summit Switch Ports on page 5-1
• Configuring Summit Switch Port Speed and Duplex Setting on page 5-2
• Summit Switch Port Commands on page 5-3
• Jumbo Frames on page 5-5
• Load Sharing on the Summit Switch on page 5-6
• Summit Switch Port-Mirroring on page 5-10
• Smart Redundancy on page 5-13
For information on how to configure ports on the BlackDiamond or Alpine switch, refer
to Chapter 4.
E
NABLING AND
D
ISABLING
S
UMMIT
S
WITCH
P
ORTS
By default, all ports are enabled. To enable or disable one or more ports, use the
following command:
[enable | disable] ports <portlist>