User guide

Using a BOOTP Server 3-4

Manually Configuring the IP Settings 3-4

Disconnecting a Telnet Session 3-6

Controlling Telnet Access 3-6

Using Secure Shell 2 (SSH2) 3-7

Enabling SSH2 3-7

Using ExtremeWare Vista 3-8

Controlling Web Access 3-9

Using SNMP 3-10

Accessing Switch Agents 3-10

Supported MIBs 3-10

Configuring SNMP Settings 3-10

Displaying SNMP Settings 3-13

Authenticating Users 3-13

RADIUS Client 3-13

Per-Command Authentication Using RADIUS 3-14

Configuring RADIUS Client 3-14

RADIUS RFC 2138 Attributes 3-16

RADIUS Server Configuration Example (Merit) 3-16

RADIUS Per-Command Configuration Example 3-17

Configuring TACACS+ 3-20

Using the Simple Network Time Protocol 3-21

Configuring and Using SNTP 3-22

SNTP Configuration Commands 3-25

SNTP Example 3-25

4CONFIGURING BLACKDIAMOND AND ALPINE SWITCH SLOTS

AND PORTS

Configuring a Slot 4-1

BlackDiamond and Alpine Switch Port Configuration 4-2

Enabling and Disabling BlackDiamond and Alpine Switch Ports 4-3

Configuring BlackDiamond and Alpine Switch Port Speed and

Duplex Setting 4-3

Turning Off Autonegotiation for a Gigabit Ethernet Port 4-4

BlackDiamond and Alpine Switch Port Commands 4-4

Jumbo Frames 4-7

Enabling Jumbo Frames 4-7

Load Sharing on the BlackDiamond and Alpine Switch 4-7