User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
2-7
C
OMMON
C
OMMANDS
config slot <slot> module [f32t | f32f | f48t | g4x |
g6x | g8x | g12x]
Configures a slot for a particular I/O
module card.
config ssh2 key {pregenerated} Generates the SSH2 host key.
config sys-recovery-level [none | critical | all] Configures a recovery option for instances
where an exception occurs in
ExtremeWare. Specify one of the
following:
■
none — No recovery mode.
■
critical — ExtremeWare logs an
error to the syslog, and reboots the
system after a critical task exceptions
■
all — ExtremeWare logs an error to
the syslog, and reboots the system
after any exception.
config time <date> <time> Configures the system date and time. The
format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. You
cannot set the year past 2036.
config timezone <gmt_offset> {autodst | noautodst} Configures the time zone information to
the configured offset from GMT time. The
format of gmt_offset is +/- minutes from
GMT time. Specify:
■
autodst — Enables automatic
Daylight Savings Time change.
■
nosautodst — Disables automatic
Daylight Savings Time change.
The default setting is autodst.
config vlan <name> ipaddress <ip_address>
{<mask>}
Configures an IP address and subnet
mask for a VLAN.
create account [admin | user] <username>
{<password>}
Creates a user account. This command is
available to admin-level users and to users
with RADIUS command authorization. The
username is between 1 and 32 characters,
the password is between 0 and 16
characters.
create vlan <name> Creates a VLAN.
delete account <username> Deletes a user account.
Table 2- 3: Common Commands (continued)
Command Description