User guide

18-2 E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
S
TATUS
M
ONITORING AND
S
TATISTICS
For more information about show commands for a specific ExtremeWare feature,
refer to the appropriate chapter in this guide.
Table 18-1 describes
show
commands that are used to monitor the status of the switch.
Table 18-1: Status Monitoring Commands
Command Description
show diag {<slot> | msm-a | msm-b} Displays software diagnostics. For BlackDiamond
switches, optionally specify a slot number of the
MSM64i.
show log {<priority>} Displays the current snapshot of the log. Options
include:
■
priority — Filters the log to display message
with the selected priority or higher (more critical).
Priorities include critical, emergency, alert, error,
warning, notice, info, and debug. If not specified,
all messages are displayed.
show log config Displays the log configuration, including the syslog
host IP address, the priority level of messages being
logged locally, and the priority level of messages
being sent to the syslog host.
show memory {detail} Displays the current system memory information.
Specify the detail option to view task-specific
memory usage.
show switch Displays the current switch information, including:
■
sysName, sysLocation, sysContact
■
MAC address
■
Current time and time, system uptime, and time
zone
■
Operating environment (temperature indication,
fans, and power supply status)
■
NVRAM configuration information
■
MSM64i information (BlackDiamond switch only)
■
Scheduled reboot information
■
Software licensing information (Summit24,
Summit48, Summit7i switches only)