User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
17-39
W
EB
C
ACHE
R
EDIRECTION
F
LOW
R
EDIRECTION
C
OMMANDS
To configure flow redirection, use the commands listed in Table 17-5.
F
LOW
R
EDIRECTION
E
XAMPLE
Figure 17-7 uses flow redirection to redirect Web traffic to Web cache servers. In this
example, the clients and the cache devices are located on different networks. This is
done by creating a different VLAN for the clients and cache devices.
Table 17-5: Flow Redirection Commands
Command Description
config flow-redirection <flow_policy> add
next-hop <ipaddress>
Adds the next hop host (gateway) that is to receive
the packets that match the flow policy. By default,
ping-based health checking is enabled.
config flow-redirection <flow_policy> delete
next-hop <ipaddress>
Deletes the next hop host (gateway).
create flow-redirection <flow_policy> [tcp |
udp] destination {<ipaddress/mask> | any]
ip-port [<L4Port> | any] source
[<ipaddress/mask> | any]
Creates a flow redirection policy.
delete flow-redirection <flow_policy> Deletes a flow redirection policy.
show flow-redirection Displays the current flow redirection configuration
and statistics.