User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
17-17
B
ASIC
SLB C
OMMANDS
disable slb vip <vipname> {close-connections-now} Disables a VIP group. When disabled, no
new connections are allowed to the real
servers. If close-connections-now is
specified, all existing connections are
immediately closed. Otherwise, the existing
connections are closed naturally, and are
subject to connection reaping if idle for
longer than the treaper-timeout configured
on the SLB port.
enable slb Enables SLB processing on the switch, and
activates the following functions for
Transparent, Translational, and Port
Translation modes:
■
Exporting of VIP routes or proxy ARP
for VIP addresses
■
Processing of VIP lookup and
connection setup
■
Establishing communication with
redundant SLB switches
■
Positively responding to MIB, 3DNS and
SeeIT requests
The default setting is disabled.
enable slb gogo-mode <master> grouping
<portlist>
Enables GoGo mode processing for a
group of ports. There are no additional
configuration commands for GoGo mode.
enable slb node [<ipaddress>:<L4Port> | all} Enables one or more nodes to receive data
traffic. A node represents a physical server.
enable slb l4-port <L4Port> Enables an L4 port to be used for SLB.
enable slb vip <ipaddress>:<L4Port> Enables a single VIP port.
enable slb vip <vipname> Enables a VIP group.
show slb Displays the current SLB global
configuration information, including:
■
Global enable/disable mode
■
Global modes
■
Default settings for health checker
show slb node [<ipaddress>:{<L4Port>} | all]
{detail}
Displays node-specific configuration
information and status.
Table 17-2: Basic SLB Commands
Command Description