User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
1-9
S
OFTWARE
F
ACTORY
D
EFAULTS
For default settings of individual ExtremeWare features, refer to individual
chapters in this guide.
Virtual LANs Three VLANs pre-defined. VLAN named default contains
all ports and belongs to the STPD named
s0. VLAN mgmt
exists only on switches that have an Ethernet management
port, and contains only that port. The Ethernet
management port is DTE only, and is not capable of
switching or routing. VLAN
MacVLanDiscover is used only
when using the MAC VLAN feature.
802.1Q tagging All packets are untagged on the default VLAN ( default)
Spanning Tree Protocol Disabled for the switch; enabled for each port in the STPD
Forwarding database aging period 300 seconds (5 minutes)
IP Routing Disabled
RIP Disabled
OSPF Disabled
IP multicast routing Disabled
IGMP Enabled
IGMP snooping Enabled
DVMRP Disabled
GVRP Disabled
PIM-DM Disabled
IPX routing Disabled
NTP Disabled
DNS Disabled
Port mirroring Disabled
Table 1- 1: ExtremeWare Global Factory Defaults (continued)
Item Default Setting