User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
16-15
U
SING
R
OUTING
A
CCESS
P
OLICIES
Figure 16-6: ICMP packets are filtered out
U
SING
R
OUTING
A
CCESS
P
OLICIES
To use routing access policies, you must perform the following steps:
1 Create an access profile.
2 Configure the access profile to be of type permit, deny, or none.
3 Add entries to the access profile. Entries can be one of the following types:
— IP addresses and subnet masks
— VLANs (BlackDiamond switch only)
— Autonomous system path expressions (as-paths) (BGP only)
— BGP communities (BGP only)
4 Apply the access profile.
EW_038
10.10.10.1
10.10.10.100 10.10.20.100
10.10.20.1
NET20 VLANNET10 VLAN
ICMP