User guide

1-8 E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
E
XTREME
W
ARE
O
VER VIEW
O
BTAINING A
S
ECURITY
L
ICENSE
To obtain information on enabling features that require export restriction, access the
Extreme Networks Support website at:
http://www.extremenetworks.com/go/security.htm
Fill out a contact form to indicate compliance or non-compliance with the export
restrictions. If you are in compliance, you will be given information that will allow you
to enable security features.
S
ECURITY FEATURES UNDER LICENSE CONTROL
ExtremeWare version 6.0 and above supports the SSH2 protocol. SSH2 allows the
encryption of Telnet session data. The encryption methods used are under U.S. export
restriction control.
S
OFTWARE
F
ACTORY
D
EFAULTS
Tab le 1-1 shows factory defaults for global ExtremeWare features.
Table 1- 1: ExtremeWare Global Factory Defaults
Item Default Setting
Serial or Telnet user account admin with no password and user with no password
Web network management Enabled
Telnet Enabled
SSH2 Disabled
SNMP Enabled
SNMP read community string public
SNMP write community string private
RMON Disabled
BOOTP Enabled on the default VLAN ( default )
QoS All traffic is part of the default queue
QoS monitoring Automatic roving
802.1p priority Recognition enabled
802.3x flow control Enabled on Gigabit Ethernet ports