User guide

E
XTREME
W
ARE
S
OFTWARE
U
SER
G
UIDE
15-13
D
ISPLAYING
IPX S
ETTINGS
The IPX configuration shown in example in Figure 15-2 is as follows:
create vlan Exec
create vlan Support
config Exec protocol ipx_8022
config Exec add port 4:*,5:*
config Support add port 7:*
config Exec xnetid 2516 enet_8022
config Support xnetid A2B5 enet_8022
D
ISPLAYING
IPX S
ETTINGS
To display settings for various IPX components, use the commands listed in Table 15-6.
Table 15-6: IPX Show Commands
Command Description
show ipxconfig {vlan <name>} Displays IPX configuration information for
one or all VLANs.
show ipxfdb {vlan <name> | xnetid <netid>} Displays the hardware IPX FDB information.
show ipxrip {vlan <name>} Displays IPX/RIP configuration and statistics
for one or all VLANs.
show ipxroute {vlan <name> | xnetid <netid> |
origin [static | rip | local]}
Displays the IPX routes in the route table.
show ipxsap {vlan <name>} Displays IPX/SAP configuration and status
for one or all VLANs.
show ipxservice {vlan <name> | xnetid <netid> |
origin [static | sap | local]}
Displays IPX services learned by way of
SAP.
show ipxstats {vlan <name>} Displays IPX packet statistics for the IPX
router, and one or all VLANs.